Reusable adult silicone soft tip SpO2 Sensor for S&W patient monitors

Reusable adult silicone soft tip SpO2 Sensor for S&W patient monitors 

Part number S410S-190

adult (more than 40 kg),

clip type - "silicone soft tip",

wire length - 3 m,

connector - Round 10 Pin

Reusable pulse oximeter sensor is designed to measure the level of saturation (oxygen saturation) of the patient's blood.

### Technical Overview: Reusable Adult Silicone Soft Tip SpO2 Sensor #### Introduction A Reusable Adult Silicone Soft Tip SpO2 Sensor is an advanced medical device designed to measure peripheral capillary oxygen saturation (SpO2) and pulse rate non-invasively. This device is crucial for monitoring patients’ respiratory and cardiovascular health across various healthcare settings, including hospitals, clinics, and outpatient care. #### Design and Materials The predominant material used in this sensor is medical-grade silicone, known for its hypoallergenic properties, flexibility, and durability. The soft tip design ensures patient comfort, especially during prolonged monitoring sessions. **Key Components:** 1. **Sensor Probe:** This consists of light-emitting diodes (LEDs) and a photodetector. The LEDs typically emit red (660 nm) and infrared (940 nm) light, which penetrate the tissue and are absorbed differently by oxygenated and deoxygenated hemoglobin. 2. **Comfortable Soft Tip:** Made from biocompatible silicone, it ensures minimal pressure and irritation on the skin, crucial for patient compliance. 3. **Cable Assembly:** Consists of shielded wires that prevent electrical noise, ensuring signal integrity from the sensor to the monitor. 4. **Connector:** A secure plug-in that links the sensor to the monitoring device, often standardized for compatibility with multiple devices. #### Functional Specifications 1. **Measurement Range:** - SpO2: 0% to 100% - Pulse Rate: 30 bpm to 250 bpm 2. **Accuracy:** - SpO2: ±2% for 70%-100% range, ±3% for 50%-69% - Pulse Rate: ±2 bpm or ±2% (whichever is greater) 3. **Response Time:** Rapid acquisition of SpO2 and pulse rate typically within 8-20 seconds. 4. **Operational Temperature Range:** 0°C to 40°C, ensuring functionality in various clinical environments. #### Application 1. **Attachment:** The sensor is typically attached to the patient’s finger, although it can also be applied to other sites such as the ear lobe or toe when finger attachment is not feasible. 2. **Calibration and Monitoring:** Once attached, the sensor requires minimal calibration. The cumulative data is displayed on the connected pulse oximeter, providing continuous real-time readings. 3. **Reusability:** Unlike disposable sensors, this reusable version is designed for multiple uses. It can be sterilized using recommended medical cleaning procedures, making it cost-effective and environmentally friendly. #### Advantages 1. **Patient Comfort:** The soft silicone material and ergonomic design enhance patient comfort, reducing the likelihood of pressure sores. 2. **Durability:** Medical-grade silicone is robust and can withstand regular disinfection without losing its integrity. 3. **Accuracy:** The dual wavelength LED and sensitive photodetector provide precise readings essential for critical clinical decisions. 4. **Cost-Effectiveness:** Reusability lowers the long-term cost for healthcare providers compared to single-use sensors. #### Maintenance and Sterilization 1. **Cleaning:** Clean the sensor after each use with a mild detergent and water, avoiding aggressive cleaning agents that can degrade the silicone. 2. **Disinfection:** Use hospital-grade disinfectants as per the manufacturer's guidelines to ensure no degradation of the sensor components. Avoid immersing the sensor in liquid. 3. **Storage:** Store in a clean, dry place away from direct sunlight and extreme temperatures to prolong the sensor's lifespan. #### Conclusion The Reusable Adult Silicone Soft Tip SpO2 Sensor is an integral component in patient monitoring, combining comfort, accuracy, and durability. Its design caters to the demanding needs of clinical environments, providing reliable data essential for patient care. Proper maintenance and usage ensure its longevity, making it a cost-effective solution for continuous patient monitoring. In summary, this sensor is a sophisticated solution designed to enhance patient monitoring. Its blend of advanced materials, precise functional capabilities, and ergonomic design exemplifies modern medical technology's evolution towards improved patient care outcomes.