Inspire Innovations international limited.
Type the part number or keyword in the search box. If you do not know the catalog number, you can find the product by category or by manufacturer. To find a product by device model, first select the manufacturer.
VINNO S2-9C for VINNO 8
VINNO S2-9C Ultrasound Probe for VINNO 8
VINNO S2-9C is a phased-array ultrasound transducer manufactured by VINNO for the VINNO 8 diagnostic ultrasound system. Its compact sector-scanning format and 2–9 MHz operating range support diagnostic examinations performed with compatible system presets. Catalog number: S2-9C.
Purpose and Features
- Phased-array transducer for real-time diagnostic ultrasound imaging.
- Sector image format suitable for scanning through limited acoustic windows.
- 2–9 MHz frequency range for balancing penetration and image detail.
- Designed for use with the VINNO 8 ultrasound platform.
- Dedicated probe cable and connector for connection to the compatible scanner.
Technical Specifications
- Manufacturer: VINNO
- Model: S2-9C
- Catalog number: S2-9C
- Product type: Diagnostic ultrasound transducer
- Array type: Phased array
- Scanning format: Sector
- Operating frequency range: 2–9 MHz
- Compatible ultrasound system: VINNO 8
Compatible Medical Equipment
The VINNO S2-9C ultrasound probe is compatible with the VINNO 8 diagnostic ultrasound system. Before use, confirm that the scanner software configuration and selected examination preset support this transducer. Do not connect the probe to equipment that is not identified as compatible by VINNO.
Usage Instructions
- Inspect the probe housing, acoustic surface, cable, strain relief, and connector before every examination. Do not use the transducer if damage is visible.
- Connect the S2-9C securely to the designated probe port of the VINNO 8 system according to the scanner operating manual.
- Select the connected transducer and the appropriate clinical preset on the ultrasound system.
- Apply an approved medical ultrasound coupling gel to the scanning surface and perform the examination using only the pressure necessary to maintain acoustic contact.
- After use, remove the gel and clean and disinfect the probe with products and procedures approved for VINNO transducers. Follow the specified concentration, contact time, immersion limits, and drying requirements.
- Store the probe in a protected position without sharp bends, twisting, pulling, or compression of the cable.
The transducer should be operated by trained medical personnel in accordance with the VINNO 8 user manual, applicable clinical protocols, and local infection-control requirements.
Order from Partsformed
Partsformed offers the VINNO S2-9C probe for VINNO 8 with worldwide shipping, competitive prices, and high-quality products. Confirm the model and catalog number before ordering to ensure correct compatibility with your ultrasound equipment.
