Inspire Innovations international limited.
Type the part number or keyword in the search box. If you do not know the catalog number, you can find the product by category or by manufacturer. To find a product by device model, first select the manufacturer.
Stryker 5400-210-060 PD Series Perforator Chuck Attachment
Stryker 5400-210-060 PD Series Perforator Chuck Attachment
The Stryker 5400-210-060 PD Series Perforator Chuck Attachment is a powered surgical instrument accessory manufactured by Stryker. It provides the mechanical interface between a compatible Stryker PD Series driver and an approved cranial perforator, securely supporting the perforator while rotational power is transmitted during cranial bone access procedures.
Product Purpose and Features
- Designed for use with compatible Stryker PD Series powered instrument configurations.
- Provides a dedicated chuck connection for an approved cranial perforator.
- Transfers rotational drive from the connected surgical handpiece to the perforator.
- Detachable design supports instrument setup, inspection, removal, and processing in accordance with Stryker instructions.
- Identified by Stryker catalog number 5400-210-060 for accurate ordering and inventory control.
Technical Specifications
- Manufacturer: Stryker
- Catalog number: 5400-210-060
- Product family: PD Series
- Product type: Perforator chuck attachment
- Primary function: Connection and retention of a compatible cranial perforator
- Drive method: Mechanically powered through a compatible surgical driver or handpiece
- Clinical application: Cranial perforation during procedures requiring bone access
- Power source: No independent power source; operates through the connected powered instrument
Compatible Medical Devices and Instruments
The Stryker 5400-210-060 perforator chuck is intended for Stryker PD Series powered driver or handpiece configurations whose manufacturer documentation specifies this catalog number. It must be used only with perforators approved for the PD Series chuck interface. Compatibility should be confirmed using the reference numbers and current instructions for the driver, attachment, and perforator rather than appearance alone.
General Usage Instructions
- Confirm that the driver, perforator, and attachment are compatible and approved for the planned procedure.
- Inspect the chuck attachment for contamination, deformation, looseness, corrosion, or other visible damage before use.
- Ensure that the powered handpiece is stopped and placed in a safe condition before installing or removing the attachment.
- Connect the 5400-210-060 attachment to the compatible PD Series driver according to the applicable Stryker instructions.
- Insert the approved perforator into the chuck and verify that it is fully seated and securely retained.
- Operate the assembled instrument only within the instructions and limitations specified for the driver, attachment, and perforator.
- After use, stop the driver before removing the perforator or attachment. Handle and process each component according to its labeling, Stryker reprocessing instructions, and the healthcare facility’s protocol.
Ordering from Partsformed
Partsformed supplies the Stryker 5400-210-060 PD Series Perforator Chuck Attachment with worldwide shipping, competitive prices, and a commitment to high-quality products. Verify the manufacturer, catalog number, required system compatibility, and supplied condition before ordering for clinical inventory or equipment support.
