Inspire Innovations international limited.
Type the part number or keyword in the search box. If you do not know the catalog number, you can find the product by category or by manufacturer. To find a product by device model, first select the manufacturer.
SIUK STP 211B-192 Thermal Printer
SIUK STP 211B-192 Thermal Printer by Seiko Instruments – STP211B-192-E
The SIUK STP 211B-192 Thermal Printer is a compact direct thermal printer mechanism manufactured by Seiko Instruments. Identified by catalog number STP211B-192-E, it is designed for compatible medical analyzers that generate printed test results, operating records and status information. Direct thermal technology creates clear output on heat-sensitive paper without ink cartridges or ribbons, reducing routine maintenance requirements.
Technical specifications
- Manufacturer: Seiko Instruments Inc.
- Model: STP211B-192
- Catalog number: STP211B-192-E
- Product type: thermal printer mechanism
- Printing method: direct thermal line printing
- Printhead configuration: 192 dots per line
- Resolution: 8 dots/mm, approximately 203 dpi
- Active printing width: 24 mm
- Consumable: compatible heat-sensitive thermal roll paper
- Ink or ribbon required: no
Compatible medical equipment
The Seiko STP211B-192-E thermal printer is used in configurations of the following blood gas analyzers:
- Siemens RAPIDLab 248
- Siemens RAPIDLab 348
Compatibility depends on the analyzer configuration, printer connector and installed mechanism revision. Before ordering, compare the complete STP211B-192-E designation with the label on the existing printer and consult the equipment service documentation.
Purpose and key features
- Produces permanent paper records of analyzer results and operational information.
- Uses direct thermal printing for quiet operation and straightforward maintenance.
- Provides 192-dot line output at approximately 203 dpi.
- Requires no toner, liquid ink or printing ribbon.
- Compact mechanism format supports installation inside compatible diagnostic equipment.
- Exact Seiko model identification helps technicians select the correct replacement assembly.
Installation and usage instructions
- Switch off the medical device and disconnect it from the power supply before servicing.
- Confirm that the removed printer is labeled STP211B-192-E and verify connector and mounting compatibility.
- Installation should be performed by a qualified medical equipment service technician in accordance with the analyzer service manual.
- Secure the mechanism correctly and ensure that cables are fully seated without being stretched, twisted or trapped.
- Load the thermal paper in the direction specified by the analyzer manufacturer, with the heat-sensitive surface facing the printhead.
- Restore power and run the analyzer’s printer test or print a sample record to confirm paper feeding and legible output.
- Do not touch the printhead surface with bare fingers or sharp tools. Remove paper dust using only a cleaning method approved for thermal printer mechanisms.
Order from Partsformed
Partsformed supplies the SIUK STP 211B-192 Thermal Printer manufactured by Seiko Instruments for compatible medical equipment. Customers benefit from worldwide shipping, competitive prices and high-quality products. Use the full model and catalog reference STP211B-192-E Seiko when placing an order to support accurate product identification.
