Inspire Innovations international limited.
Type the part number or keyword in the search box. If you do not know the catalog number, you can find the product by category or by manufacturer. To find a product by device model, first select the manufacturer.
Olympus WB50402W Double Pedal Foot Switch
Olympus WB50402W Double Pedal Foot Switch
The Olympus WB50402W Double Pedal Foot Switch is a reusable, wired control accessory for compatible Olympus electrosurgical generators. It enables hands-free activation of cutting and coagulation output, allowing the operator to maintain instrument control while selecting the required electrosurgical function by foot.
The two-pedal layout provides separate controls for CUT and COAG activation. Standard visual identification helps distinguish the functions: the yellow pedal controls cutting output, while the blue pedal controls coagulation output. The foot switch is intended for use by trained medical personnel in accordance with the operating instructions for the connected Olympus generator.
Purpose and Key Features
- Hands-free control of compatible Olympus electrosurgical equipment
- Two separate pedals for CUT and COAG activation
- Yellow CUT pedal and blue COAG pedal for clear function identification
- Wired connection to the designated foot-switch socket of the generator
- Reusable medical equipment accessory
- Floor-operated design suitable for operating-room and endoscopy workflows
- Genuine Olympus model identified by catalog number WB50402W
Technical Specifications
- Manufacturer: Olympus
- Catalog number: WB50402W
- Model: WB50402W
- Product type: Double-pedal electrosurgical foot switch
- Number of pedals: 2
- Controlled functions: CUT and COAG output activation
- CUT pedal identification: Yellow
- COAG pedal identification: Blue
- Connection type: Wired connection to a compatible Olympus electrosurgical generator
- Operating method: Momentary foot-pedal activation
- Patient contact: No direct patient contact
- Use classification: Reusable accessory
Compatible Olympus Medical Devices
The Olympus WB50402W foot switch is documented for use with the following Olympus electrosurgical generators:
- Olympus ESG-100 Electrosurgical Generator
- Olympus ESG-400 Electrosurgical Generator
Compatibility should be confirmed against the generator label, system configuration, and current Olympus instructions for use before installation.
Usage Instructions
- Confirm that the electrosurgical generator is switched off before connecting the foot switch.
- Inspect the pedals, cable, connector, and housing for visible damage, contamination, or excessive wear.
- Insert the connector into the designated foot-switch receptacle on the compatible Olympus generator, following the generator instructions for use.
- Place the foot switch on a stable floor surface where the operator can reach both pedals without stretching or changing position unsafely.
- Switch on the generator and select the required electrosurgical settings according to the procedure and the generator manual.
- Press the yellow pedal to activate the configured cutting output or the blue pedal to activate the configured coagulation output.
- Release the pedal to stop activation. Verify correct response before clinical use.
- After the procedure, switch off the generator, disconnect the foot switch as instructed, and clean it using methods approved in the applicable Olympus reprocessing instructions.
Do not use the Olympus WB50402W if the cable, connector, housing, or either pedal is damaged, or if activation is intermittent. Electrosurgical equipment and accessories must be operated only by appropriately trained healthcare professionals.
Order Olympus WB50402W from Partsformed
Partsformed supplies the Olympus WB50402W Double Pedal Foot Switch for compatible electrosurgical systems, offering worldwide shipping, competitive prices, and high-quality products. Verify the catalog number and generator compatibility before ordering to ensure the correct foot-switch accessory for your medical equipment.
