Inspire Innovations international limited.
Type the part number or keyword in the search box. If you do not know the catalog number, you can find the product by category or by manufacturer. To find a product by device model, first select the manufacturer.
Olympus WA03300A LITE CABLE
Olympus WA03300A LITE CABLE – 4.25 mm Autoclavable Light-Guide Cable
The Olympus WA03300A LITE CABLE is a reusable fiber-optic light-guide cable manufactured by Olympus for surgical endoscopy systems. Also described as a light-guide cable, it transmits illumination from a compatible Olympus light source to a rigid endoscope or telescope, supporting clear visualization of the examination or operative field. The cable does not transmit images or electrical signals.
Purpose and Key Features
- Transfers light from a compatible medical light source to an endoscopic telescope.
- Fiber-optic construction provides efficient illumination transmission.
- 4.25 mm fiber-bundle diameter is designed for applications requiring substantial light delivery.
- Three-meter length provides practical positioning flexibility in operating-room installations.
- CF-type configuration for compatible Olympus endoscopy equipment.
- Reusable and autoclavable when processed according to the Olympus reprocessing instructions.
Technical Specifications
- Manufacturer: Olympus
- Catalog number: WA03300A
- Model: WA03300A
- Product type: Fiber-optic light-guide cable
- Commercial designation: LITE CABLE / light-guide cable
- Cable length: 3 m
- Fiber-bundle diameter: 4.25 mm
- Connector configuration: CF type
- Use: Endoscopic illumination transmission
- Processing: Autoclavable and reusable in accordance with the manufacturer’s instructions
Compatible Medical Equipment
The Olympus WA03300A light-guide cable is intended for Olympus rigid endoscopy configurations that specify a 4.25 mm, 3 m CF-type cable. It is used between a compatible Olympus light source and an Olympus rigid telescope or endoscope with the corresponding light-guide connection. WA03300A is included in configurations of the Olympus VISERA ELITE II system, including use with the Olympus CLV-S200-IR light source where this cable is specified. Compatibility should always be confirmed in the instructions for use or system chart for the exact light source, telescope, adapters, and procedure.
Usage Instructions
- Inspect the cable, connectors, outer covering, and fiber bundle before use. Do not use a cable with visible damage, loose fittings, severe fiber breakage, or contamination.
- Ensure that the compatible light source is switched off or set to standby before making connections.
- Connect one end securely to the designated light-source output and the other end to the compatible telescope or endoscope light-guide connector. Do not force or bend the fittings.
- Route the cable without tight coils, crushing, pulling, or sharp bends that could damage the internal optical fibers.
- Activate the light source and use the lowest illumination level that provides adequate visualization.
- After the procedure, switch off the light source and allow the connectors to cool before handling. Light-guide connections may become hot during operation.
- Disconnect by holding the connector body rather than pulling the cable.
- Clean, disinfect, inspect, package, and sterilize the reusable cable strictly according to the current Olympus reprocessing instructions and the healthcare facility’s validated protocol.
Ordering from Partsformed
Partsformed supplies the Olympus WA03300A LITE CABLE with worldwide shipping, competitive prices, and a commitment to high-quality medical equipment products. Verify the catalog number WA03300A and compatibility with your Olympus endoscopy system before ordering.
