Inspire Innovations international limited.
Type the part number or keyword in the search box. If you do not know the catalog number, you can find the product by category or by manufacturer. To find a product by device model, first select the manufacturer.
N2199/01 SLE AIR HOUSE, 3 m (9.8 ft) NIST EN DIN. Compatible
N2199/01 SLE AIR HOSE, 3 m (9.8 ft), NIST EN DIN
The N2199/01 SLE AIR HOSE is a medical air supply hose manufactured by SLE Limited. Its 3 m (9.8 ft) length and NIST EN DIN connection configuration are intended for linking compatible respiratory equipment to an appropriate medical air supply. This replacement hose is identified by SLE catalog number N2199/01 and reference number 5466139.
Purpose and Key Features
- Designed for the delivery of medical air between compatible supply and equipment connections.
- Manufactured by SLE Limited for use with appropriately configured medical equipment.
- Features a NIST EN DIN connector arrangement.
- Provides a 3 m hose length for practical equipment positioning.
- Clearly specified for air service rather than oxygen or another medical gas.
- Suitable as a replacement for an existing hose identified by part number N2199/01.
Technical Specifications
- Manufacturer: SLE Limited
- Manufacturer part number: N2199/01
- Additional catalog reference: 5466139
- Product type: Medical air supply hose
- Specified gas: Air
- Length: 3 m
- Length in feet: 9.8 ft
- Connection specification: NIST EN DIN
Compatible Medical Equipment
The SLE N2199/01 air hose is compatible with SLE Limited respiratory and ventilation equipment configurations that specify part number N2199/01 and use the corresponding NIST medical-air connection with an EN DIN supply interface. Compatibility is determined by the connector configuration, designated gas, and the requirements stated in the medical device documentation. Before ordering, confirm the equipment model, inlet type, supply outlet, and existing hose part number. This gas hose should not be treated as a universal connection for devices with different fittings.
Usage Instructions
- Verify that the medical device documentation specifies an air hose with the N2199/01 NIST EN DIN configuration.
- Confirm that both connection points are intended for medical air and that the fittings match without adapters or forced insertion.
- Inspect the hose and connectors for contamination, deformation, cracking, abrasion, or other visible damage before use.
- Connect each fitting to its designated interface in accordance with the equipment and medical-gas supply instructions.
- Secure the connections and perform the leak and operational checks required by the healthcare facility before placing the device into clinical service.
- Route the 3 m hose to avoid sharp bends, crushing, tension, heat sources, and trip hazards.
- After use, isolate and depressurize the supply as directed by the applicable procedures before disconnecting the hose.
- Remove the hose from service if damage, leakage, or an insecure connection is detected. Installation and inspection should be performed by appropriately trained personnel.
Order from Partsformed
Partsformed supplies N2199/01 SLE AIR HOSE, 3 m (9.8 ft), NIST EN DIN and other high-quality medical equipment products at competitive prices. Worldwide shipping is available to support hospitals, clinics, service organizations, and medical equipment professionals in multiple regions.
