Inspire Innovations international limited.
Type the part number or keyword in the search box. If you do not know the catalog number, you can find the product by category or by manufacturer. To find a product by device model, first select the manufacturer.
N2035/01 SLE Oxygen hose assembly 3 m NIST EN DIN. Compatible
SLE N2035/01 Oxygen Hose Assembly 3 m, NIST EN DIN
The SLE N2035/01 oxygen hose assembly is a 3-metre medical gas hose designed to connect compatible SLE ventilators to an oxygen supply with the specified NIST and EN DIN interfaces. Manufactured by SLE Limited, this oxygen supply accessory supports a secure connection between the ventilator gas inlet and the appropriate medical oxygen source. It is not a patient breathing circuit.
Product purpose and features
- Transfers medical oxygen from a compatible supply outlet to an SLE ventilator.
- Uses a non-interchangeable screw-threaded NIST connection and an EN DIN oxygen connection.
- Three-metre length provides practical reach during ventilator installation.
- Gas-specific design helps prevent connection to an incompatible medical gas service.
- Original SLE Limited catalog reference for reliable product identification.
Technical specifications
- Manufacturer: SLE Limited
- Catalog number: N2035/01
- Product type: Medical oxygen hose assembly
- Gas: Oxygen
- Hose length: 3 m
- Connection specification: NIST to EN DIN
- Application: Connection of compatible SLE respiratory equipment to a suitable medical oxygen supply
Compatible medical devices
The N2035/01 hose is intended for compatible configurations of SLE 4000, SLE 5000 and SLE 6000 ventilators that specify this catalog number and use the corresponding NIST oxygen inlet and EN DIN oxygen supply connection. Compatibility depends on the device configuration and the gas outlet standard installed at the facility. Confirm the ventilator documentation, connector type and part number before purchase or installation.
Installation and usage instructions
- Verify that the hose label and catalog number are N2035/01 and that both connections match the ventilator and oxygen source.
- Inspect the complete assembly before use. Do not use it if the hose, fittings, threads or seals show damage, contamination or excessive wear.
- Connect the designated NIST fitting to the compatible oxygen inlet and the EN DIN fitting to the correct medical oxygen supply, following the ventilator instructions and local medical gas procedures.
- Ensure both fittings are properly secured without forcing or modifying the connections.
- Perform the prescribed gas-supply and leak checks before placing the ventilator into clinical service.
- Keep oxygen fittings free from oil, grease and other combustible contaminants.
- Route the hose without sharp bends, crushing, tension or contact with heat sources.
- Clean, inspect and replace the assembly according to SLE instructions and the healthcare facility’s approved maintenance schedule.
Ordering from Partsformed
Order the N2035/01 SLE oxygen hose assembly 3 m NIST EN DIN from Partsformed for competitive prices, high-quality products and worldwide shipping. Match the catalog number, hose length and connector standard with the required SLE ventilator configuration before ordering.
