Inspire Innovations international limited.
Type the part number or keyword in the search box. If you do not know the catalog number, you can find the product by category or by manufacturer. To find a product by device model, first select the manufacturer.
Merit Medical Systems MSWSTDA18150 SplashWire, 018" * 150cm, angled, standard
Merit Medical Systems MSWSTDA18150 SplashWire 0.018-inch x 150 cm Angled Standard Guide Wire
The Merit Medical Systems MSWSTDA18150 SplashWire is a hydrophilic guide wire designed to facilitate the placement of compatible devices during diagnostic and interventional procedures. Its 0.018-inch diameter, 150 cm working length, angled distal tip, and standard support configuration provide a practical combination for controlled navigation and device delivery.
Purpose and Key Features
- Hydrophilic guide wire: The lubricious coating is activated by wetting, helping reduce friction during advancement through compatible devices.
- Angled tip: Supports directional control while navigating the intended anatomy.
- Standard support: Provides the standard wire support configuration specified for this SplashWire model.
- 0.018-inch diameter: Intended for devices specifically labeled to accept a 0.018-inch guide wire.
- 150 cm length: Suitable for procedures and device systems requiring this guide wire length.
- Single-use medical device: Intended for use by trained healthcare professionals in accordance with the manufacturer’s instructions.
Technical Specifications
- Manufacturer: Merit Medical Systems
- Brand: SplashWire
- Catalog number: MSWSTDA18150
- Product type: Hydrophilic guide wire
- Guide wire diameter: 0.018 inch
- Guide wire length: 150 cm
- Tip configuration: Angled
- Support configuration: Standard
- Reuse status: Single use
Compatible Medical Devices and Models
The MSWSTDA18150 is compatible with catheter-based devices whose manufacturer specifications expressly permit a 0.018-inch guide wire and provide adequate working-length compatibility. Appropriate device categories may include:
- Diagnostic or interventional catheters labeled for 0.018-inch guide wires
- Introducer and dilator assemblies designed around a 0.018-inch wire platform
- Microaccess and vascular-access components that specify 0.018-inch guide wire compatibility
- Other catheter-delivery devices with a guide wire lumen approved for the stated diameter and 150 cm length
Compatibility must be confirmed for each specific device model by checking its instructions for use, maximum accepted guide wire diameter, required wire length, and procedural application. Brand name alone does not establish compatibility.
General Usage Instructions
- Confirm that the package is intact and inspect the guide wire for damage before use.
- Verify that every catheter, introducer, dilator, or other device used with the wire accepts a 0.018-inch guide wire and is suitable for a 150 cm length.
- Wet the guide wire with sterile saline as directed in the Merit Medical Systems instructions for use to activate the hydrophilic coating. Keep the coated surface wet during handling.
- Introduce the distal end into the compatible access device and advance it using gentle, controlled movements under the imaging method required for the procedure.
- Use the angled tip only with appropriate visualization and control. Do not advance, rotate, or withdraw the wire against unexplained resistance.
- If resistance occurs, stop manipulation and determine the cause before proceeding. Avoid excessive force, bending, or kinking.
- Maintain the required guide wire position while advancing the compatible catheter or device.
- After the procedure, remove the wire carefully, inspect it, and dispose of it according to institutional policy. Do not clean, resterilize, or reuse.
Always follow the current Merit Medical Systems instructions for use and the operating instructions for every accompanying medical device. This product should be selected and used only by appropriately trained medical personnel.
Order MSWSTDA18150 SplashWire from Partsformed
Partsformed supplies the Merit Medical Systems MSWSTDA18150 SplashWire 0.018-inch x 150 cm angled standard guide wire for professional medical procurement. Customers benefit from worldwide shipping, competitive prices, and high-quality products. Verify the catalog number, diameter, length, tip shape, and support configuration before placing an order.
