Inspire Innovations international limited.
Type the part number or keyword in the search box. If you do not know the catalog number, you can find the product by category or by manufacturer. To find a product by device model, first select the manufacturer.
Karl Storz 495NE FIBER OPTIC LIGHT CABLE
Karl Storz 495NE Fiber Optic Light Cable
The Karl Storz 495NE Fiber Optic Light Cable is a reusable medical light cable designed to transmit cold light from a compatible KARL STORZ light source to an endoscope. Its 4.8 mm diameter supports efficient light transmission, while the 180 cm length provides practical reach when arranging endoscopic equipment in an operating room or examination area.
Purpose and Key Features
- Transmits illumination from a compatible cold-light source to a connected endoscope.
- Fiber-optic construction carries light without an electrical connection at the endoscope.
- 4.8 mm cable diameter supports demanding endoscopic illumination applications.
- 180 cm length allows convenient positioning between the light source and medical endoscope.
- Reusable design intended for professional endoscopy systems.
- Original KARL STORZ model identified by catalog number 495NE.
Technical Specifications
- Manufacturer: Karl Storz
- Catalog number: 495NE
- Product type: Fiber optic light cable
- Cable diameter: 4.8 mm
- Cable length: 180 cm
- Light transmission: Fiber optic
- Application: Endoscopic cold-light delivery
- Use type: Reusable medical accessory
Compatible Medical Equipment
The Karl Storz 495NE light cable is intended for KARL STORZ endoscopy equipment fitted with the corresponding standard light-cable connections. Compatible equipment includes rigid or flexible endoscopes with a matching KARL STORZ light post and compatible cold-light sources, including configurations from the following product lines:
- KARL STORZ XENON NOVA 175, including model 201315 20
- KARL STORZ XENON NOVA 300, including model 201340 20
- KARL STORZ POWER LED 175, including model 201614 20
- KARL STORZ POWER LED 300, including model 201612 20
Compatibility depends on the connector configuration of the light source and endoscope. Confirm the equipment connections and the applicable KARL STORZ instructions before use.
Usage Instructions
- Inspect the cable, connectors, outer covering, and light-transmitting surfaces for contamination, deformation, or visible damage.
- With the light source switched off, connect one end of the 495NE cable to the compatible light-source socket.
- Attach the opposite connector securely to the endoscope light post without forcing or twisting the connection.
- Switch on the light source and select the lowest illumination level that provides adequate visualization.
- Avoid sharp bends, crushing, excessive tension, and pulling the cable by its connectors.
- After use, switch off the light source and allow the connectors to cool before disconnecting the cable.
- Clean, disinfect, and sterilize the reusable cable only according to the current KARL STORZ instructions and the healthcare facility's validated reprocessing protocol.
- Inspect light transmission after reprocessing and remove the cable from service if it is damaged or produces significantly reduced or uneven illumination.
Handling and Safety
Fiber optic connectors can become hot during operation. Do not place an illuminated cable end on the patient, surgical drapes, or heat-sensitive materials. Never look directly into the active light output. Keep connector surfaces clean and dry, and avoid impacts that could damage the internal optical fibers.
Order Karl Storz 495NE from Partsformed
Partsformed offers the Karl Storz 495NE Fiber Optic Light Cable and other high-quality medical equipment products at competitive prices. Worldwide shipping is available to support hospitals, clinics, service organizations, and endoscopy departments in multiple regions.
