Inspire Innovations international limited.
Type the part number or keyword in the search box. If you do not know the catalog number, you can find the product by category or by manufacturer. To find a product by device model, first select the manufacturer.
Karl Storz 495495NCSFiber Optic Light Cable, 250 cm, O4.8 mm
KARL STORZ 495NCS Fiber Optic Light Cable, 250 cm, O4.8 mm
The KARL STORZ 495NCS Fiber Optic Light Cable is designed to transmit illumination from a compatible cold-light source to an endoscope during diagnostic and surgical procedures. Its 250 cm working length supports flexible equipment positioning, while the 4.8 mm cable diameter is suitable for applications requiring efficient delivery of endoscopic illumination. Manufactured by KARL STORZ, this medical light cable is identified by catalog number 495NCS.
Product Purpose and Features
- Transfers light from a compatible KARL STORZ light source to an endoscope.
- Fiber optic construction provides optical illumination without carrying electrical power to the endoscope.
- 250 cm length allows convenient placement of the light source relative to the sterile field and procedure table.
- 4.8 mm cable diameter for endoscopic illumination applications.
- Suitable for professional use in compatible KARL STORZ endoscopy systems.
Technical Specifications
- Manufacturer: KARL STORZ
- Catalog number: 495NCS
- Product type: Fiber optic light cable
- Light transmission method: Fiber optics
- Length: 250 cm
- Cable diameter: O4.8 mm
- Application: Transmission of light between a compatible endoscopic light source and endoscope
Compatible Medical Devices and Models
The KARL STORZ 495NCS light cable is intended for endoscopic illumination systems equipped with the corresponding KARL STORZ light-cable connections. Compatible configurations include KARL STORZ rigid or flexible endoscopes with a matching light connection and suitable cold-light sources, including systems based on the following light-source models:
- KARL STORZ XENON 300 SCB
- KARL STORZ POWER LED 300 SCB
Compatibility depends on the connectors fitted to both the light source and the endoscope. Confirm the required interface and the device manufacturer’s instructions before connecting the 495NCS cable.
Usage Instructions
- Inspect the cable, connectors, outer covering, and optical end faces before each procedure. Do not use the cable if it is damaged, heavily kinked, contaminated, or unable to transmit adequate light.
- Ensure that the light source is switched off or set to its lowest output before making connections.
- Connect one end of the cable securely to the compatible KARL STORZ light source and the other end to the endoscope’s light connection.
- Arrange the cable without tight bends, crushing, stretching, or contact with moving equipment.
- Activate the light source and increase illumination only to the level required for the procedure.
- Do not look directly into an illuminated connector or leave an active cable end in contact with the patient, drapes, or heat-sensitive materials.
- After use, switch off the light source and allow the connectors to cool before disconnecting the cable.
- Clean, disinfect, inspect, and, when required, sterilize the cable strictly according to the current KARL STORZ instructions for use and the healthcare facility’s validated procedures.
Worldwide Ordering from Partsformed
Partsformed supplies the KARL STORZ 495NCS Fiber Optic Light Cable, 250 cm, O4.8 mm with worldwide shipping, competitive prices, and high-quality products for hospitals, clinics, surgical centers, and medical equipment service organizations. Verify the catalog number, dimensions, and connector compatibility before ordering.
