Inspire Innovations international limited.
Type the part number or keyword in the search box. If you do not know the catalog number, you can find the product by category or by manufacturer. To find a product by device model, first select the manufacturer.
Karl Storz 495 NT FIBEROPTIC LIGHT CABLE, 2.5 MM FINER BUNDLE DIA, 180 CM LENGTH
Karl Storz 495 NT Fiberoptic Light Cable, 2.5 mm Fiber Bundle Diameter, 180 cm
The Karl Storz 495 NT Fiberoptic Light Cable is designed to transmit illumination from a compatible medical light source to an endoscope during diagnostic and surgical procedures. Its 2.5 mm fiber bundle and 180 cm length support efficient light delivery while allowing practical positioning of connected equipment. Manufactured by Karl Storz, this reusable medical light cable is identified by catalog number 495 NT.
Purpose and Key Features
- Transfers light from a compatible cold-light source to an endoscopic instrument.
- Uses a fiberoptic bundle for illumination transmission without electrical power at the instrument connection.
- Compact 2.5 mm fiber bundle diameter for systems that specify this cable size.
- 180 cm cable length provides working distance between the light source and endoscope.
- Original Karl Storz model identification supports accurate accessory selection and inventory management.
Technical Specifications
- Manufacturer: Karl Storz
- Catalog number: 495 NT
- Product type: Fiberoptic light cable
- Fiber bundle diameter: 2.5 mm
- Overall length: 180 cm
- Primary function: Transmission of illumination between a medical light source and an endoscope
Compatible Medical Devices and Model Matching
The Karl Storz 495 NT light cable is intended for endoscopic systems with matching Karl Storz light-source and instrument-side connections. It can be used with compatible Karl Storz cold-light sources, endoscopes, telescopes, and related visualization equipment when the device documentation specifies 495 NT or confirms the corresponding interface and 2.5 mm fiber bundle requirement. Compatibility should be verified by catalog number, connector configuration, and the instructions supplied with the medical device before use.
Usage Instructions
- Inspect the cable, connectors, and visible fiber surfaces before each procedure. Do not use the cable if it is damaged or if light transmission is visibly impaired.
- Ensure the light source is switched off or placed in standby before connecting the cable.
- Attach one end to the compatible light source and the other end to the endoscope or telescope, confirming that both connections are secure.
- Route the cable without sharp bends, crushing, excessive tension, or contact with areas where it may be damaged.
- Activate the light source and select the lowest illumination level that provides an adequate image.
- After use, switch off the light source and allow the connectors to cool before handling or disconnecting them.
- Clean, disinfect, inspect, and reprocess the cable strictly according to the current Karl Storz instructions for use and the healthcare facility’s validated procedures.
Ordering from Partsformed
Partsformed supplies the Karl Storz 495 NT Fiberoptic Light Cable and other high-quality medical equipment products at competitive prices. Worldwide shipping is available to help hospitals, clinics, service organizations, and medical equipment distributors obtain the required endoscopy accessories efficiently. Confirm the catalog number 495 NT, cable length, bundle diameter, and device interface before ordering.
