Inspire Innovations international limited.
Type the part number or keyword in the search box. If you do not know the catalog number, you can find the product by category or by manufacturer. To find a product by device model, first select the manufacturer.
Karl Storz 26005M Monopolar High-Frequency Cord
Karl Storz 26005M Monopolar High-Frequency Cord
Product Overview
The Karl Storz 26005M Monopolar High-Frequency Cord is an electrosurgical connecting cable designed to link compatible monopolar surgical instruments with a suitable high-frequency generator. Manufactured by Karl Storz, this 300 cm cord provides the connection required to transmit monopolar high-frequency energy during approved electrosurgical procedures.
The extended cable length supports practical equipment placement in the operating room, while the 4 mm plug enables connection to compatible HF equipment. The cord must be used only with devices whose instructions for use specify the Karl Storz 26005M or confirm matching electrical and mechanical connections.
Technical Specifications
- Manufacturer: Karl Storz
- Catalog number: 26005M
- Product type: Monopolar high-frequency connecting cord
- Operating mode: Monopolar electrosurgery
- Cord length: 300 cm
- Generator-side connection: 4 mm plug
- Application: Connection of compatible monopolar electrosurgical instruments to an appropriate HF generator
Compatible Medical Equipment
The Karl Storz 26005M HF cord is intended for Karl Storz monopolar instruments and high-frequency surgical generators that are approved for this cable and equipped with the corresponding connection. Compatibility depends on the instrument connector, generator output socket, and the instructions supplied with each device.
- Karl Storz monopolar surgical instruments specified for use with cord model 26005M
- Compatible high-frequency electrosurgical generators with a matching 4 mm connection
- Approved laparoscopic, endoscopic, and open-surgery monopolar instruments requiring this type of HF connecting cable
Before use, verify the generator model, instrument reference, connector type, and approved accessories in the current manufacturer documentation. A physically matching connector alone does not establish electrical compatibility.
Purpose and Key Features
- Transfers monopolar high-frequency energy between an approved electrosurgical generator and instrument
- 300 cm length supports flexible positioning of the generator and surgical equipment
- 4 mm plug for compatible HF generator connections
- Original Karl Storz catalog reference for reliable product identification and ordering
- Suitable for professional use by trained medical personnel in controlled clinical environments
Usage Instructions
- Confirm that the generator and monopolar instrument are approved for use with the Karl Storz 26005M cord.
- Place the HF generator in standby or switch it off before making cable connections.
- Inspect the cord, insulation, plug, and instrument connection for cracks, deformation, exposed conductors, or other damage. Do not use a damaged cable.
- Insert the 4 mm plug fully into the designated monopolar output on the compatible generator.
- Connect the opposite end securely to the approved monopolar instrument.
- Route the cable to prevent sharp bends, tension, crushing, accidental disconnection, or contact with hot surfaces.
- Apply electrosurgical settings according to the generator and instrument instructions for use and the requirements of the procedure.
- After the procedure, place the generator in standby or switch it off before disconnecting the cord. Handle, clean, disinfect, sterilize, store, and inspect the product strictly according to the current Karl Storz reprocessing instructions.
Ordering from Partsformed
Partsformed supplies the Karl Storz 26005M Monopolar High-Frequency Cord with worldwide shipping, competitive prices, and a commitment to high-quality products. Confirm the catalog number 26005M and compatibility with your electrosurgical system before ordering.
