Inspire Innovations international limited.
Type the part number or keyword in the search box. If you do not know the catalog number, you can find the product by category or by manufacturer. To find a product by device model, first select the manufacturer.
Karl Storz 26002M Monopolar High-Frequency Cord
Karl Storz 26002M Monopolar High-Frequency Cord
The Karl Storz 26002M Monopolar High-Frequency Cord is a reusable electrosurgical connecting cable designed to carry high-frequency monopolar current between a compatible KARL STORZ electrosurgical generator and monopolar surgical instrument. Its 300 cm length supports flexible equipment placement in the operating room while maintaining a reliable electrical connection during compatible electrosurgical procedures.
Product Features
- Original monopolar high-frequency cord manufactured by Karl Storz
- Designed for compatible KARL STORZ electrosurgical generators and monopolar instruments
- 4 mm plug configuration
- 300 cm cable length for convenient operating-room setup
- Reusable design for professional clinical environments
- Catalog number 26002M enables accurate identification and ordering
Technical Specifications
- Manufacturer: Karl Storz
- Catalog number: 26002M
- Product type: Monopolar high-frequency cord
- Operating mode: Monopolar electrosurgery
- Plug size: 4 mm
- Cable length: 300 cm
- Application: Connection of a compatible monopolar electrosurgical instrument to an HF generator
Compatible Medical Devices and Models
The Karl Storz 26002M HF cord is specified for use with the following KARL STORZ electrosurgical systems:
- AUTOCON II 400 SCB systems designated 111, 115, 122 and 125
- AUTOCON II 200
- AUTOCON II 80
Instrument compatibility also depends on the required 4 mm monopolar connection. Confirm the generator socket, instrument connector and current KARL STORZ instructions for use before installation.
Purpose and Clinical Use
The 26002M cord provides the electrical pathway from a compatible high-frequency generator to a monopolar surgical instrument. In monopolar electrosurgery, the complete setup also requires the appropriate patient return electrode and associated accessories specified for the generator and procedure. The cord does not replace the return-electrode connection.
Usage Instructions
- Before use, inspect the entire cable, insulation, plug and connectors. Do not use the cord if it is damaged, deformed or shows exposed conductors.
- Ensure that the electrosurgical generator is switched off or placed in its safe standby state before making connections.
- Connect the cord securely to the compatible generator receptacle and the corresponding monopolar instrument connection.
- Install the required return electrode and other accessories according to the generator and accessory instructions for use.
- Select operating settings only in accordance with the electrosurgical generator, instrument and procedure instructions.
- After the procedure, deactivate the generator before disconnecting the cord. Handle connectors by their housings rather than pulling on the cable.
- Clean, disinfect, inspect and reprocess the reusable cord strictly according to the current Karl Storz instructions for use and the healthcare facility’s validated procedures.
This medical accessory should be used only by trained healthcare professionals familiar with monopolar high-frequency surgery and the connected equipment.
Order Karl Storz 26002M from Partsformed
Partsformed supplies high-quality products for medical equipment, including the Karl Storz 26002M Monopolar High-Frequency Cord. Customers benefit from competitive prices and worldwide shipping. Use catalog number 26002M when ordering to ensure precise product identification.
