Inspire Innovations international limited.
Type the part number or keyword in the search box. If you do not know the catalog number, you can find the product by category or by manufacturer. To find a product by device model, first select the manufacturer.
INFINITY ID WATERLOCK 2 by Draeger Inc.
INFINITY ID WATERLOCK 2 by Drager (Draeger), Catalog 6872020
INFINITY ID WATERLOCK 2 is a disposable water trap manufactured by Drager (Draeger) for compatible anesthesia workstations and patient-gas measurement systems. Installed in the sidestream gas-sampling path, it collects condensation and other liquids before they can enter the sensitive gas-analysis module. This helps maintain reliable respiratory-gas monitoring and protects compatible Drager equipment from moisture contamination.
The integrated Infinity ID transponder enables supported Drager systems to identify the accessory and monitor its period of use. Catalog number 6872020 is supplied as a package of 12 water traps.
Product Features
- Designed for sampled respiratory-gas monitoring applications.
- Captures water and condensation from the gas-sampling line.
- Helps protect the connected patient-gas measurement module.
- Infinity ID technology supports automatic accessory identification on compatible Drager equipment.
- Transparent housing allows the liquid level to be checked visually.
- Luer-type connection for the gas-sampling line.
- Disposable design supports straightforward replacement and hygienic workflow.
Technical Specifications
- Product name: INFINITY ID WATERLOCK 2
- Catalog number: 6872020
- Manufacturer: Drager (Draeger)
- Product type: Disposable water trap for sidestream respiratory-gas sampling
- Identification technology: Infinity ID transponder
- Sampling-line interface: Luer-type connection
- Maximum routine service period: 4 weeks
- Minimum syringe volume for draining: 20 mL
- Package quantity: 12 water traps
Compatible Drager Medical Equipment
INFINITY ID WATERLOCK 2 is intended for Drager equipment that specifies catalog number 6872020 and is fitted with the corresponding patient-gas measurement module and water-trap receptacle. Compatible applications include:
- Drager Perseus A500 anesthesia workstation
- Drager Atlan A300 and Atlan A300 XL anesthesia workstations in compatible gas-monitoring configurations
- Drager Atlan A350 and Atlan A350 XL anesthesia workstations
- Drager Zeus Infinity Empowered anesthesia workstation
Compatibility depends on the installed gas-analysis configuration. Match the accessory catalog number with the equipment instructions before installation.
Installation and Use
- Inspect the new water trap and do not use it if the housing, connection, or seal is damaged.
- Insert the INFINITY ID WATERLOCK 2 fully into the designated water-trap receptacle on the compatible Drager device.
- Connect the gas-sampling line securely to the Luer-type sampling port.
- During operation, check the transparent trap regularly and drain it before the collected liquid reaches the maximum-level marking.
- To drain the trap, disconnect the sampling line, remove the water trap, and use an empty syringe with a capacity of at least 20 mL at the designated drainage connection.
- Reinstall the trap securely and reconnect the sampling line before resuming gas measurement.
- Replace the water trap after a maximum of 4 weeks, or sooner if it is damaged, contaminated, blocked, or cannot be drained correctly.
- Dispose of the used accessory according to the healthcare facility’s hygiene and medical-waste procedures.
Order INFINITY ID WATERLOCK 2 from Partsformed
Partsformed supplies high-quality Drager medical equipment accessories, including INFINITY ID WATERLOCK 2, catalog 6872020. Customers benefit from competitive prices, worldwide shipping, and dependable access to products for the maintenance and operation of compatible anesthesia and respiratory-gas monitoring systems.
