Inspire Innovations international limited.
Type the part number or keyword in the search box. If you do not know the catalog number, you can find the product by category or by manufacturer. To find a product by device model, first select the manufacturer.
GE Healthcare 755583-HEL DESFLURANE/CO2/O2 /N2 /O/N2 QUICK CALIBRATION GAS FOR AS/3 ANESTHESIA MONITOR
GE Healthcare 755583-HEL Desflurane/CO2/O2/N2O/N2 Quick Calibration Gas for AS/3 Anesthesia Monitor
Product Overview
GE Healthcare 755583-HEL Quick Calibration Gas is a multicomponent reference gas manufactured for calibration of the gas-measurement system used with the GE Healthcare AS/3 Anesthesia Monitor. The mixture contains desflurane, carbon dioxide, oxygen, nitrous oxide and nitrogen, enabling the compatible monitor to check and calibrate its respiratory and anesthetic-agent gas measurements.
This medical equipment calibration accessory is intended for maintenance and performance verification by trained personnel. It is a technical reference gas and must not be administered to patients.
Features and Benefits
- Genuine GE Healthcare calibration product for the AS/3 monitoring platform
- Multicomponent mixture covering desflurane, CO2, O2, N2O and N2 measurement channels
- Quick-calibration format designed to support efficient monitor servicing
- Helps maintain dependable gas-analysis performance when used according to GE Healthcare procedures
- Clearly identified by catalog number 755583-HEL for accurate ordering and replacement
Technical Specifications
- Manufacturer: GE Healthcare
- Catalog number: 755583-HEL
- Product type: Quick calibration gas
- Gas components: Desflurane, carbon dioxide, oxygen, nitrous oxide and nitrogen
- Primary application: Calibration and verification of anesthesia-monitor gas measurements
- Compatible model: GE Healthcare AS/3 Anesthesia Monitor
- Use category: Medical equipment service and calibration accessory
- Patient use: Not intended for inhalation or clinical administration
Before use, confirm the certified gas concentrations, pressure information, expiration date and storage requirements printed on the supplied product label. These label-specific values must match the calibration procedure and equipment configuration.
Compatible Medical Equipment
The 755583-HEL calibration gas is specified for use with the GE Healthcare AS/3 Anesthesia Monitor. Compatibility should be confirmed by catalog number and by the service documentation for the monitor and installed gas-analysis configuration. Do not substitute a different calibration mixture solely on the basis of connector appearance.
Usage Instructions
- Allow only trained biomedical, clinical engineering or authorized service personnel to perform the calibration.
- Inspect the container, valve and required connection accessories before use. Do not use a damaged, leaking or expired product.
- Confirm that catalog number 755583-HEL and the certified composition shown on the label correspond to the GE Healthcare AS/3 calibration procedure.
- Place the monitor in the required service or calibration mode according to the applicable GE Healthcare instructions.
- Connect the calibration gas using the approved regulator, tubing and interface specified for the AS/3 system.
- Introduce the gas only at the pressure and flow conditions stated in the equipment service instructions and on the product labeling.
- Allow the calibration sequence to finish, then verify that the monitor reports successful completion and acceptable gas readings.
- Disconnect the supply safely, close the valve where applicable and store the calibration gas in accordance with its label and safety documentation.
Use the product in a well-ventilated service area, keep it away from heat and ignition sources, and follow all institutional procedures for handling pressurized calibration gases.
Order GE Healthcare 755583-HEL from Partsformed
Partsformed supplies GE Healthcare 755583-HEL Quick Calibration Gas for the AS/3 Anesthesia Monitor with worldwide shipping, competitive prices and high-quality products. Matching the manufacturer and catalog number helps ensure that the correct calibration accessory is selected for your anesthesia-monitor maintenance requirements.
