Inspire Innovations international limited.
Type the part number or keyword in the search box. If you do not know the catalog number, you can find the product by category or by manufacturer. To find a product by device model, first select the manufacturer.
Draeger (Drager) 6728531 DETECTOR TUBE WATER VAPOR PK10
Draeger (Drager) 6728531 Water Vapor Detector Tubes, Pack of 10
Product overview
The Draeger (Drager) 6728531 Detector Tube Water Vapor PK10, designated Water Vapour 5/a-P, is a colorimetric test tube for measuring moisture in compressed air and medical gas systems. It provides an on-site indication of water vapor concentration without electronic sensors, making it suitable for routine compressed-gas quality checks with compatible Drager test equipment.
Each single-use tube contains a chemical reagent that changes from yellow to reddish brown when exposed to water vapor. The result is read directly from the printed tube scale. The package contains ten detector tubes for ten individual measurements.
Features and benefits
- Original Drager detector tube manufactured for compressed-air and medical-gas quality testing.
- Direct-reading colorimetric measurement with a clear yellow-to-reddish-brown reaction.
- Measurement range suitable for detecting low moisture concentrations.
- No electronic calibration or external power supply required.
- Sealed, single-use glass tubes help preserve reagent integrity before testing.
- Compatible with selected Drager Aerotest and MultiTest systems.
- Pack of 10 tubes supports scheduled maintenance and repeated quality checks.
Technical specifications
- Manufacturer: Draeger (Drager)
- Catalog number: 6728531
- Tube designation: Water Vapour 5/a-P
- Product type: Colorimetric water vapor detector tube
- Measured substance: Water vapor, H?O
- Measurement range: 5–200 mg/m?
- Initial reagent color: Yellow
- Color change: Yellow to reddish brown
- Sample type: Compressed air or compatible medical gas
- Reading method: Direct reading from the graduated tube scale
- Use: Single-use
- Package quantity: 10 detector tubes
Compatible Drager equipment
Draeger 6728531 Water Vapor tubes are intended for use with compatible Drager compressed-gas testing systems, including:
- Drager Aerotest Alpha
- Drager Aerotest Simultan HP
- Drager MultiTest med. Int. for medical-gas quality testing
The tube is a gas-quality testing consumable and is not installed directly in ventilators, anesthesia machines, patient monitors, or other patient-connected devices. Use it only with equipment configured for the Water Vapour 5/a-P tube and follow the operating instructions for the applicable test system.
Usage instructions
- Confirm that catalog number 6728531 and the Water Vapour 5/a-P range are appropriate for the gas and test system.
- Inspect the sealed tube and verify that it is undamaged and within its stated expiration date.
- Open both ends with an approved Drager tube opener while wearing suitable eye protection and handling the glass carefully.
- Insert the tube into the designated holder with the arrow pointing in the direction of gas flow.
- Connect the holder to the compatible Drager Aerotest or MultiTest system.
- Apply the flow rate and sampling time specified in the operating instructions for that test system.
- After sampling, identify the end of the reddish-brown discoloration and read the corresponding value on the tube scale.
- Record the result, remove the used tube, and dispose of it according to applicable rules for glass and chemical test consumables.
For reliable results, use the prescribed sampling procedure, avoid touching the open ends, and do not reuse a detector tube.
Worldwide supply from Partsformed
Partsformed offers the Draeger (Drager) 6728531 Detector Tube Water Vapor PK10 with worldwide shipping, competitive prices, and a commitment to high-quality products. This genuine Drager consumable is a practical choice for service organizations, healthcare facilities, laboratories, diving operations, and industrial teams that monitor compressed-air or medical-gas quality.
