Inspire Innovations international limited.
Type the part number or keyword in the search box. If you do not know the catalog number, you can find the product by category or by manufacturer. To find a product by device model, first select the manufacturer.
Covidien E6009 15FT STANDARD BIPOLAR FOOTSWITCH
Covidien E6009 15FT STANDARD BIPOLAR FOOTSWITCH
Covidien E6009 15FT Standard Bipolar Footswitch
The Covidien E6009 15FT Standard Bipolar Footswitch is a wired electrosurgical accessory designed for hands-free activation of bipolar energy from a compatible Valleylab electrosurgical generator. Its 15-foot cable allows flexible placement in the operating room while enabling the clinician to control bipolar output without releasing the connected instrument. Catalog number E6009 identifies the standard bipolar footswitch manufactured by Covidien.
Purpose and Key Features
- Provides foot-controlled activation of bipolar electrosurgical output.
- Supports hands-free generator operation during procedures using compatible bipolar instruments.
- Includes a 15-foot cable for convenient positioning around the surgical table and generator cart.
- Wired design provides a direct connection to the generator’s designated bipolar footswitch receptacle.
- Designed for professional use with compatible Covidien and Valleylab electrosurgical systems.
Technical Specifications
- Manufacturer: Covidien
- Brand: Valleylab
- Catalog number: E6009
- Product type: Standard bipolar electrosurgical footswitch
- Control method: Foot-operated bipolar output activation
- Connection type: Wired generator connection
- Cable length: 15 ft
- Approximate cable length in metric units: 4.6 m
- Application: Activation of bipolar electrosurgical energy from a compatible generator
Compatible Medical Devices
The Covidien E6009 bipolar footswitch is intended for electrosurgical generators equipped with the corresponding standard bipolar footswitch connection. Compatible Valleylab generator models include:
- Valleylab Force FX electrosurgical generators
- Valleylab Force FX-C electrosurgical generators
- Valleylab Force EZ electrosurgical generators
- Valleylab Force EZ-C electrosurgical generators
Compatibility should be confirmed using the electrosurgical generator’s operator manual and the connector configuration of the specific system before installation.
Usage Instructions
- Ensure that the electrosurgical generator is switched off before connecting the footswitch.
- Inspect the footswitch, cable, and connector for visible damage. Do not use the accessory if any component is damaged.
- Insert the E6009 connector into the generator receptacle designated for the bipolar footswitch, following the generator manufacturer’s instructions.
- Position the footswitch on a stable, dry floor surface where the operator can reach it comfortably.
- Route the 15-foot cable to prevent tension, accidental disconnection, or a trip hazard.
- Connect the appropriate bipolar instrument and configure the generator according to the instrument and generator instructions for use.
- Press the footswitch to activate bipolar output and release it to stop activation.
- After the procedure, switch off the generator, disconnect the footswitch correctly, and clean and store it in accordance with the applicable Covidien instructions and facility procedures.
This electrosurgical accessory should be used only by trained healthcare professionals. Before each procedure, verify correct connection and operation according to the compatible generator’s instructions for use.
Order Covidien E6009 from Partsformed
Partsformed supplies the Covidien E6009 15FT Standard Bipolar Footswitch for healthcare facilities, surgical departments, and medical equipment service organizations. Customers benefit from worldwide shipping, competitive prices, and high-quality products for dependable medical equipment procurement.
